Description

The XC1000 is our popular universal watercooler suitable for almost all welding applications.

The ultra compact footprint makes these ideal for fitting onto the bottle carrier at the back of a power source or free standing. Three voltage versions are available, 110 volt, 230 volt, and 400 volt. All are fitted with a new protection device to stop the motor burning out if stalled for any reason. Water connections are 3/8 BSP as standard, or snap fittings on request. We only use Simaco rotary pumps these are the leading European pump manufacturer as used by ESAB, Kemppi etc. 4 of M5 mounting points are provided underneath chassis. This unit is suitable for most welding applications up to around 600 amps. An internal flow switch can be fitted to interface with the power source to prevent damage occurring to the welding torch in the event of a flow problem.

All models are sold with one year warranty & spare parts availability is guaranteed for a minimum of 15 years.

Technical specs & further information.

Technical specs

All models are AC volts input +/- 10%, Freq. 50/60Hz.

Approx. size –   247mm Length, 210mm Width, 440mm Height.

Options & accessories

Options

Choice of input voltage – 110/115V, 230V or 400V.

Red & blue snap fittings instead of 3/8 BSP.

Flow switch fitted – can be wired to stop power source in event of cooling fault.

XC2000 model (twice the size & twice the cooling capacity) for very heavy duty applications.

Accessories;

COOLANT – 1L bottle of special Ethylene Glycol to mix with clean tap water, suitable for all our water coolers & Simaco water pumps, provides lubrication, corrosion resistance & antifreeze. Mix 75% water/25% – Part number XC1001

Note; some automotive anti-freeze will cause clogging of bores or pumping problems, we advise using our XC1001 product for all MIG & TIG welding cooling.

For water cooled Plasma cutting torches extra care must be taken in choosing the correct coolant & a mix of 75% de-ionised water to 25% XC1001 is normally sufficient for protection to -15C.

Water pipes & fittings.

MIG & TIG water cooled torches.